|
 The
CG range has been developed by BSP after many years experience
of producing hydraulic piling hammers.
The hammers are designed to operate from piling rig leaders or
crane suspended and are suitable to drive sheet piles in pairs,
tubular bearing piles, H piles, combi piles, reinforced concrete
RC piles, cast in situ CIS piles and timber piles.
Guides to suit any leader section are available allowing speedy
installation on the mast.
A detachable trip is available to allow the hammer to follow the
pile without the continual paying out of the hammer rope.
Click here to view the
CG Range Datasheet as a pdf. 
| CG
HAMMER RANGES |
CG 165 |
CG 210 |
CG 240 |
CG 270 |
CG 300 |
| Dropweight Mass |
kg |
11,000 |
14,000 |
16,000 |
18,000 |
20,000 |
| Maximum energy |
kNm |
165 |
210 |
240 |
270 |
300 |
| Blow rate @ maximum energy |
blow/min |
34/100 |
32/100 |
31/100 |
31/100 |
29/100 |
| Hydraulic supply |
l/min |
385 |
375 |
370 |
425 |
415 |
| Hydraulic pressure |
bar |
260 |
260 |
285 |
270 |
290 |
| Hammer weight less helmet |
kg |
17,240 |
20,430 |
22,760 |
22,110 |
27,460 |
| Hammer length |
m |
7 |
7.45 |
7.75 |
8.05 |
8.35 |
| Hammer width |
m |
1.225 |
1.225 |
1.225 |
1.225 |
1.225 |
| Hammer depth |
m |
1.3 |
1.3 |
1.3 |
1.3 |
1.3 |
POWER PACK DETAILS |
| Engine power |
kw |
217 |
217 |
217 |
217 |
217 |
| Hydraulic pressure |
bar |
300 |
300 |
300 |
300 |
300 |
| Hydraulic supply |
l/min |
115-400 |
115-400 |
115-400 |
115-400 |
115-400 |
| Fuel tank capacity |
l |
400 |
400 |
400 |
400 |
400 |
| Hydraulic oil tank capacity |
l |
840 |
840 |
840 |
840 |
840 |
| Length |
m |
3.6 |
3.6 |
3.6 |
3.6 |
3.6 |
| Width |
m |
1.76 |
1.76 |
1.76 |
1.76 |
1.76 |
| Transport height |
m |
2.285 |
2.285 |
2.285 |
2.285 |
2.285 |
| Weight without fuel |
kg |
4000 |
4000 |
4000 |
4000 |
4000 |
| Weight full |
kg |
4800 |
4800 |
4800 |
4800 |
4800 |
|
top