ThyssenKrupp Steelcom - Products Vibro Hammers Crane Suspended PTC Variable Eccentricity

	ABI
	PTC
	Müller

Crane Suspended

	PTC Standard Frequency
	PTC High Frequency
	PTC Variable Eccentricity
	Müller

Impact Hammers

Piling Rigs

Concrete Pile Breakers

Driving the Future
Piling Symposium
Video Footage

Vibro Hammers > Crane Suspended > PTC Variable Eccentricity

The patented variable eccentric system distinguishes itself through its ability to start up and stop without any vibration. This avoids crossing resonance frequencies, reducing the level of vibrations transmitted to the crane or the surroundings by a factor of 3 to 5.

These models exceed the new international norms for limiting noise and vibration emissions, making it possible to operate in densely populated areas or city centres.

Hammers in red are currently in our rental fleet *.

The full range of hammers listed is available for sale.

VARIABLE ECCENTRICITY VIBRATORY HAMMERS
MODEL		10HFV	15HFV	15HFVS	17HFV	23HFV	30HFV	34HFV	42HFV	60HWV	60HFV	60HFVS
Power of vibrator	kW/ hp	95/ 129	140/ 190	200/ 272	240/ 326	222/ 302	307/ 417	405/ 550	350/ 469	330/ 449	425/ 578	662/ 900
Eccentric moment	m.kg	0-8	0-15	0-15	0-17	0-23	0-27	0-34	0-42	0-60	0-54	0-54
Max. Frequency	Hz/ rpm	38/ 2300	38/ 2300	38/ 2300	38/ 2300	38/ 2300	38/ 2300	38/ 2300	34/ 2040	28/ 1680	38/ 2300	38/ 2300
Max. centrifugal force	kN	470	890	890	1000	1360	1596	2000	1953	1890	3190	3190
Max. line pull capacity	kN	200	300	300	300	400	400	400	400	600	600	600
Vibrating weight	kg	1500	1910	1920	3000	3610	3770	5000	5100	6350	6360	6360
Total Weight	kg	2120	3190	3200	4500	5500	5600	7000	7100	8200	11200	11200
Max. amplitude	mm	10.6	15	15	11	13	14.3	13.6	15.7	21	17	17
Cooler*					std.	option	option	std.	std.	option	option	option
Length	m	1.55	1.78	1.78	1.965	2.2	2.2	2.32	2.32	2.22	2.24	2.24
Max. width	m	0.72	0.78	0.78	0.85	0.86	0.86	0.86	0.86	1.09	1.4	1.4
Centre width	m	0.32	0.34	0.34	0.38	0.34	0.34	0.38	0.38	0.8	0.8	0.8
Height without clamp	m	1.75	1.9	1.9	2.12	2.115	2.115	2.255	2.255	2.125	2.83	2.83
* Noticeably for continuous running
POWER PACK		180	260	350	450	450	600	700	700	600	800	1200
Intermittent rating of engine DIN6271 or ISO3046	kW/ hp	127/ 173	224/ 305	246/ 335	298/ 405	298/ 405	373/ 507	421/ 573	421/ 573	373/ 507	522/ 710	783/ 1065
Engine model		J.DEERE 6068T1	CAT 3306 DITA	CAT 3306 DITA2	CAT 3406 DITA	CAT 3406 DITA	CAT 3406 DITA1	CAT 3406E ATAAC	CAT 3406E ATAAC	CAT 3406 DITA1	CAT 3408E ATAAC	CAT 3412 DISTA
Max. rotation speed	r.p.m.	2500	2300	2300	2200	2200	2300	2300	2300	2300	2300	2100
Max. oil flow	l/mn	180	300	380	420	420	600	680	680	600	820	1170
Max. working pressure	bar	385	385	385	385	385	385	385	385	385	385	385
Hydraulic oil capacity	l	270	310	310	390	390	630	720	720	630	815	1030
Fuel capacity	l	260	400	400	400	400	1000	925	925	1000	1100	1650
Length	m	3.15	3.86	3.86	4.225	4.225	4.5	4.68	4.68	4.5	5	5.1
Width	m	1.27	1.6	1.6	1.6	1.6	1.64	1.84	1.84	1.64	2.08	2.24
Height	m	1.865	1.9	1.9	2.07	2.07	2.085	2.34	2.34	1.64	2.415	2.230 (2.630)
Weight without fuel	kg	3200	4300	4300	5000	5000	7000	7000	7000	7000	9000	10000
CONNECTING HOSES
Standard length	m	30	30	30	30	30	30	45	45	30	45	45
Weight	kg	265	395	395	395	395	615	1200	1200	615	1095	1670
CLAMPING HEAD
Single sheet piles not Z. Double straight web and Z shaped sheet piles.		Agriplex									Double Agriplex
		55t Weight 360kg	120t Weight 800kg	120t Weight 800kg	120t Weight 800kg	170t Weight 1250kg	240t Weight 2150kg	240t Weight 2150kg	240t Weight 2150kg	240t Weight 2150kg	2x240t Weight 5500kg	2x240t Weight 5500kg
Double sheet piles not Z shaped.		Multiplex
Double sheet piles not Z shaped.		2x40t Weight 600kg	2x55t Weight 1300kg	2x55t Weight 1300kg	2x55t Weight 1300kg	2x85t Weight 1650kg	2x120t Weight 2200kg	2x120t Weight 2200kg	2x120t Weight 2200kg	2x120t Weight 2200kg	2x150t Weight 3100kg	2x150t Weight 3100kg
Casings. Most box piles.		Duplex
Casings. Most box piles.		2x40t Weight 600kg	2x55t Weight 950kg	2x55t Weight 950kg	2x55t Weight 950kg	2x85t Weight 1250kg	2x120t Weight 1660kg	2x120t Weight 1660kg	2x120t Weight 1660kg	2x120t Weight 1660kg	2x150t Weight 3100kg	2x150t Weight 3100kg
* Our hire fleet changes as it regularly updated and hammers are often sold and replaced. Please contact our staff to discuss your needs.

Click here to view the PTC Vibro Drivers Brochure as a pdf.

top


Privacy Policy \| Sitemap				Copyright © by ThyssenKrupp Steelcom